€ 310.00. Save € 0
Units Sold: 234
If you are a 4G user and looking for an adjustable control signal booster, “600 sq.m booster” will be the right choice for you. It supports an 800 MHz frequency and gives you the power to manually adjust the additional signal according to your wishes. You can boost Vodafone, Three and Eir with help of this device.
The sleek design is optimal for better output and promises “5-bar” “constant signal” availability in its coverage range. You can use our booster with 100% efficiency in the entire UK and install it anywhere you wish within a very short time. We provide a full installation kit.
The impressive design paired with great technology has created an excellent signal booster. There are no harmful emissions related to our product. We guarantee your total satisfaction. If there should be the rare glitch, our professionally trained support staff is there to assist you 24/7 and with their impressive problem-solving solutions!
b) Export power LED denote
In the installation guide you can find a detailed description of selecting the best location to set up your booster. In case you still cannot find a suitable place, you can contact us through chat or by email and we will help you with the setup.
Absolutely! Our standard antennas can accept signal within 170 degrees. For cases when towers are located on the opposite side of your antenna, you might need to upgrade your system by adding a second antenna so that you can receive signal from all locations.
We sell high-quality products which are all capable of simultaneously supporting multiple devices. The limit for each booster mainly depends on its output power or ‘dBs’. We have provided a list of devices and their support limit converted to dBs below:
Estimations can also be made using this table:
|Coverage in square metres||Number of supported users|
|Up to 150 sq m||Up to 50 users|
|Up to 300 sq m||Up to 100 users|
|Up to 600 sq m||Up to 150 users|
|Up to 1500 sq m||Up to 200 users|
Here’s a simple, quick test to check whether your place is suitable for a signal booster.
The only thing you should do is check your outside signal strength on your mobile phone.
Here’s how to do it:
1. Find the highest point where you could put the outside antenna (generally on the roof).
2. Check how many signal bars you see on your mobile phone’s display while you are at that highest point
3. If you have 0 bars – contact us for help to make sure you’ll get a sufficiently powerful solution.
4. If you are suffering from poor outside signal strength of 1-2 bars, then our powerful booster kit will come to help you to get out of that troublesome situation and provide 5 full constant bars inside. (Of course, you can also use a standard kit with a yagi antenna, but the quantity of bars won’t go higher than 3-4 bars inside.)
5. If your outside signal strength is 3-4 bars, then we recommended you purchase a standard booster kit with a yagi antenna upgrade.
6. In case you have 4-5 bars outside, then no yagi upgrade is required as in this case the standard kit’s power will be sufficient enough to provide you with full 5 bars indoors.
7. Measure your property size to make sure the cable set included in a kit will be enough. We offer extra upgrades to help you have an easy set-up.
This booster is specially designed to work with a poor outdoor signal. We offer a Yagi antenna and more powerful booster included in the kit. The High Power Booster guarantees 5 constant bars inside your property.
You may still upgrade with more internal antennas and extra cable to be able get a signal in all the corners over your home, office or wherever you are using it.