Units Sold: 61
Our attractively designed All Networks signal booster tops all other boosters and supports multiple frequency bands. This is High Power Series Signal Booster specially designed for the areas with 1-3 bars outdoor signal.
The adjustable controls can be changed to your preferences for smoother voice and data transmissions with ease. This “tri-band repeater” works perfectly for 800 MHz, 900MHz, 1800MHz and 2100MHz. Regardless of your present phone coverage and frequency, you will experience improved signal strength.
Our quick installation kit comes complete with instructions and takes little time from you.
It supports all the carrier companies’ network services throughout the Ireland without any harmful emissions. Our products are rigorously tested and offer true “5-bar” signal wherever you are. In case of the rare, minor glitch, our 24/7 professionally trained staff can assist you to remedy the situation. We guarantee our products for your satisfaction so you can be impressed!
In the installation guide you can find a detailed description of selecting the best location to set up your booster. In case you still cannot find a suitable place, you can contact us through chat or by email and we will help you with the setup.
Absolutely! Our standard antennas can accept signal within 170 degrees. For cases when towers are located on the opposite side of your antenna, you might need to upgrade your system by adding a second antenna so that you can receive signal from all locations.
We sell high-quality products which are all capable of simultaneously supporting multiple devices. The limit for each booster mainly depends on its output power or ‘dBs’. We have provided a list of devices and their support limit converted to dBs below:
Estimations can also be made using this table:
|Coverage in square metres||Number of supported users|
|Up to 150 sq m||Up to 50 users|
|Up to 300 sq m||Up to 100 users|
|Up to 600 sq m||Up to 150 users|
|Up to 1500 sq m||Up to 200 users|
Here’s a simple, quick test to check whether your place is suitable for a signal booster.
The only thing you should do is check your outside signal strength on your mobile phone.
Here’s how to do it:
1. Find the highest point where you could put the outside antenna (generally on the roof).
2. Check how many signal bars you see on your mobile phone’s display while you are at that highest point
3. If you have 0 bars – contact us for help to make sure you’ll get a sufficiently powerful solution.
4. If you are suffering from poor outside signal strength of 1-2 bars, then our powerful booster kit will come to help you to get out of that troublesome situation and provide 5 full constant bars inside. (Of course, you can also use a standard kit with a yagi antenna, but the quantity of bars won’t go higher than 3-4 bars inside.)
5. If your outside signal strength is 3-4 bars, then we recommended you purchase a standard booster kit with a yagi antenna upgrade.
6. In case you have 4-5 bars outside, then no yagi upgrade is required as in this case the standard kit’s power will be sufficient enough to provide you with full 5 bars indoors.
7. Measure your property size to make sure the cable set included in a kit will be enough. We offer extra upgrades to help you have an easy set-up.
This booster is specially designed to work with a poor outdoor signal. We offer a Yagi antenna and more powerful booster included in the kit. The High Power Booster guarantees 5 constant bars inside your property.
You may still upgrade with more internal antennas and extra cable to be able get a signal in all the corners over your home, office or wherever you are using it.